|
Quad PTFE Coated Multistrand Wires
Quad PTFE Coated Single Strand Wires
| |
MEDWIRE PRODUCTS ARE NOT INTENDED FOR ANY KIND OF HUMAN IMPLANTATION
Existing Sigmund Cohn Corp customers can now submit orders for all Medwire products online. Simply fill out the online order form and submit. Your order will be sent via secure email. The order form requires that you include the following information:
Part Number
Length
Purchase Order Number
Complete bill to and ship to address
E-mail Address
Phone Number
Preferred Method of Shipping
New customers must email newcustomer@sigmundcohn.com to set up an account.
The catalogued items are generally available for immediate shipment. Terms for Universities and U.S. Government agencies are Net 10 days, with shipment made UPS wherever possible.
All diameters and tensile strengths given are typical and normal. Any wire considered to be unsatisfactory, for any reason, must be returned immediately for credit or replacement.
Quad PTFE Coated Multistrand Wires
LOW-LOSS MULTISTRAND CONDUCTOR FOR MICROELECTRODES
Part number AG7/40T
- Seven strands of #40 (7/40) quad-PTFE coated fine Silver
- Each strand .0031"
- Diameter over quad-PTFE approximately 0.25 mm. (B & S #28)
- Break load over 350 grams
- Easily soldered: heat with flame, brush off charred PTFE and solder with standard Tin/Lead solder
- Minimum order - 50 feet
MULTISTRAND STAINLESS
Part number 316SS7/44T
- Stainless steel, type 316, fabricated from seven strands of wire, .002" in diameter
- Diameter over quad PTFE .009" - less than one quarter millimeter
- Extremely flexible, break strength of more than 1,000 grams
- Minimum order - 100 feet
IRIDIUM PLATINUM MULTISTRAND
Part number 10Ir9/49T
- Nine strands of .0011" 10% Iridium - 90% Platinum quad-PTFE coated to approximately .006"
- PTFE thickness .001"
- Break load 400 grams
- Extremely flexible, strong, and corrosion resistant
- Minimum order - 10 feet
Quad PTFE Coated Single Strand Wires
PTFE COATED - 10% IRIDIUM 90% PLATINUM
- The combination of the chemically neutral Platinum with Iridium is combined with PTFE insulation
- Stress relieved for maximum straightness and tensile strength
- Minimum order - 10 feet
| Bare Diameter (inches) | B & S Gauge | Coated Diameter (inches) | Part Number |
| .001 | #50 | .0014 | 10Ir1T |
| .003 | #40 | .0045 | 10Ir3T |
| .005 | #36 | .007 | 10Ir5T |
| .007 | #33 | .0097 | 10Ir7T |
PTFE COATED - 20% IRIDIUM 80% PLATINUM
- All the benefits of 10% Iridium - 90% Platinum, but stiffer and 30% stronger because of the increased Iridium content
- The corrosion resistance you need
| Bare Diameter (inches) | B & S Gauge | Coated Diameter (inches) | Part Number |
| .001 | #50 | .0014 | 20Ir1T |
| .002 | #44 | .003 | 20Ir2T |
| .003 | #40 | .0045 | 20Ir3T |
PTFE COATED SILVER WIRE
- Silver 99.99% offered in three stock sizes
- Annealed to maximum softness
- Tensile strength: Approximately 30,000 psi
- Minimum order - 100 feet per item
| Bare Diameter (inches) | B & S Gauge | Coated Diameter (inches) | Part Number |
| .003 | #40 | .0045 | AG3T |
| .005 | #36 | .007 | AG5T |
| .010 | #30 | .013 | AG10T |
WIRE TYPE: 316 STAINLESS STEEL
- Available immediately in four stock sizes
- Coating: Quadruple PTFE
- Temper: Annealed for ease of handling
- Minimum order - 500 feet (Any single size)
| Bare Diameter (inches) | B & S Gauge | Coated Diameter (inches) | Part Number |
| .003 | #40 | .0045 | 316SS3T |
| .005 | #36 | .007 | 316SS5T |
| .008 | #32 | .011 | 316SS8T |
| .010 | #30 | .013 | 316SS10T |
PTFE COATED PURE PLATINUM 99.99%
- Available in two sizes:
- .005", fully annealed for maximum compliance (Tensile strength approximately 25,000 psi).
- .003", stiffer, only partially annealed to 70,000 psi.
- Minimum order - 10 feet (Any single size)
| Bare Diameter (inches) | B & S Gauge | Coated Diameter (inches) | Part Number |
| .003 | #40 | .0045 | Pt3T |
| .005 | #36 | .007 | Pt5T |
PTFE COATED PLATINUM ALLOY WIRE 30% IRIDIUM PLATINUM
- The strongest, toughest Platinum alloy available
- Coated with neutral, abrasion-resistant PTFE
- Produced to meet a steadily increasing demand for a stiffer PTFE-coated Microelectrode probe
- Tensile strength at .010", 230,000 psi
| Bare Diameter (inches) | B & S Gauge | Coated Diameter (inches) | Part Number |
| .010 | #30 | .013 | 30Ir10T |
BARE, UNCOATED SILVER WIRE
- Silver 99.99%
- Now available bare in five stock sizes
| Bare Diameter (inches) | B & S Gauge | Part Number |
| .005 | #36 | AG5X |
| .010 | #30 | AG10X |
| .015 | #26 | AG15X |
| .020 | #24 | AG20X |
| .025 | #22 | AG25X |
COMPARATIVE MEASUREMENTS
B & S
Number | Bare Diameter | Coated Diameter |
| (inches) | (mm) | (inches) | (mm) |
| 50 | 0.001 | 0.025 | 0.0014 | 0.036 |
| 44 | 0.002 | 0.050 | 0.0030 | 0.075 |
| 40 | 0.003 | 0.076 | 0.0045 | 0.114 |
| 36 | 0.005 | 0.13 | 0.0070 | 0.18 |
| 33 | 0.007 | 0.18 | 0.0095 | 0.24 |
| 32 | 0.008 | 0.20 | 0.0011 | 0.28 |
| 30 | 0.010 | 0.25 | 0.013 | 0.33 |
| 26 | 0.015 | 0.38 | - | - |
| 24 | 0.020 | 0.50 | - | - |
| 22 | 0.025 | 0.63 | - | - |
|
